LEGO compatible marble run for 3D printer DE EN

Expansion Pack

3D-View
02x04 Looping Small
Small loop with the dimensions of 02x04. Works only with the gauss cannon. Infill: 100%
Resolution: 0.2 mm
Support: No
Infill: 100%
Material: PLA+
3D-View
02x04 Looping Large
Large loop with the dimensions of 02x04. Works only with the gauss cannon. Infill: 100%
Resolution: 0.2 mm
Supports: No
Infill: 100%
Material: PLA+
3D-View
06x04 Curve to left an right
A curve to the left and right with the dimensions of 06x04
Resolution: 0.2 mm
Supports: No
Looping: >=10%
Material: PLA+
3D-View
06x04 Straight and Curve to left an right
A straight track combined with a curve to the left and right with dimensions of 06x04. So you can make one out of 3 ways
Resolution: 0.2 mm
Supports: No
Infill: >=10%
Material: PLA+
3D-View
06x06 End middle
Catching tray for the marbles with the opening in the middle and the dimensions of 06x06
Resolution: 0.2 mm
Supports: No
Infill: >=10%
Material: PLA+
3D-View
06x06 End left
Collecting tray for the marbles with the opening on the left and the dimensions of 06x06
Resolution: 0.2 mm
Supports: No
Infill: >=10%
Material: PLA+
3D-View
06x06 End right
Collecting tray for the marbles with the opening on the right and the dimensions of 06x06
Resolution: 0.2 mm
Supports: No
Infill: >=10%
Material: PLA+
3D-View
08x08 Wormhole left
Let the marbles spin in circles until they fall into the hole in the center. The entrance is on the left and the wormhole has the dimensions of 08x08
Resolution: 0.2 mm
Supports: No
Infill: >=10%
Material: PLA+
3D-View
08x08 Wormhole right
Let the marbles spin in circles until they fall into the hole in the center. The entrance is on the right and the wormhole has the dimensions of 08x08
Resolution: 0.2 mm
Supports: No
Infill: >=10%
Material: PLA+
Looping