Marble run for bricks made by 3D-printer

02x02 Start Tower
With the start tower the marble gets some speed with dimensions of 02x02

Resolution: 0.2 mm
Support: No
Infill: >=10%
Material: PLA+

02x02 Start and End
Simple start or end for the marble run with dimensions of 02x02

Resolution: 0.2 mm
Support: No
Infill: >=10%
Material: PLA+

02x02 Straight
A straight track with the dimensions of 02x02

Resolution: 0.2 mm
Support: No
Infill: >=10%
Material: PLA+

02x02 Straight with slope
A straight track with slope and the dimensions of 02x02

Resolution: 0.2 mm
Support: No
Infill: >=10%
Material: PLA+

02x02 Curve
A curve with the dimensions of 02x02

Resolution: 0.2 mm
Support: No
Infill: >=10%
Material: PLA+

02x02 Curve with slope to left
A curve with a slope to the left and the dimensions of 02x02

Resolution: 0.2 mm
Support: No
Infill: >=10%
Material: PLA+

02x02 Curve with slope to right
A curve with a slope to the right and the dimensions of 02x02

Resolution: 0.2 mm
Support: No
Infill: >=10%
Material: PLA+

02x02 Crossing
A cross with the dimensions of 02x02

Resolution: 0.2 mm
Support: No
Infill: >=10%
Material: PLA+

02x02 Tunnel
A tunnel with the dimensions of 02x02

Resolution: 0.2 mm
Support: No
Infill: >=10%
Material: PLA+

02x02 Tunnel with curve
A tunnel with curve and the dimensions of 02x02

Resolution: 0.2 mm
Support: No
Infill: >=10%
Material: PLA+

02x03 Straight
A straight track with the dimensions of 02x03

Resolution: 0.2 mm
Support: No
Infill: >=10%
Material: PLA+

02x03 Straight with slope
A straight track with slope and dimensions of 02x03

Resolution: 0.2 mm
Support: No
Infill: >=10%
Material: PLA+

02x04 Straight
A straight track with slope and dimensions of 02x04

Resolution: 0.2 mm
Support: No
Infill: >=10%
Material: PLA+

02x04 Straight with slope
A straight track with slope and the dimensions of 02x04

Resolution: 0.2 mm
Support: No
Infill: >=10%
Material: PLA+

02x06 Straight
A straight track with the dimensions of 02x06

Resolution: 0.2 mm
Support: No
Infill: >=10%
Material: PLA+

02x06 Straight with slope
A straight track with slope and the dimensions of 02x06

Resolution: 0.2 mm
Support: No
Infill: >=10%
Material: PLA+

03x03 Curve
A curve with the dimensions of 03x03

Resolution: 0.2 mm
Support: No
Infill: >=10%
Material: PLA+

03x03 Curve with slope to left
A curve with slope to the left and the dimensions of 03x03

Resolution: 0.2 mm
Support: No
Infill: >=10%
Material: PLA+

03x03 Curve with slope to right
A curve with slope to the right and the dimensions of 03x03

Resolution: 0.2 mm
Support: No
Infill: >=10%
Material: PLA+

04x04 Curve
A curve with the dimensions of 04x04

Resolution: 0.2 mm
Support: No
Infill: >=10%
Material: PLA+

04x04 Curve with slope to left
A curve with slope to the left and the dimensions of 04x04

Resolution: 0.2 mm
Support: No
Infill: >=10%
Material: PLA+

04x04 Curve with slope to right
A curve with slope to the right and the dimensions of 04x04

Resolution: 0.2 mm
Support: No
Infill: >=10%
Material: PLA+

04x04 Straight with curve to right
A straight track combined with a curve to the right and the dimensions of 04x04

Resolution: 0.2 mm
Support: No
Infill: >=10%
Material: PLA+

04x04 Straight with curve to left
A straight track combined with a curve to the left and the dimensions of 04x04

Resolution: 0.2 mm
Support: No
Infill: >=10%
Material: PLA+

04x04 2to1
2 paths become one path with dimensions of 04x04

Resolution: 0.2 mm
Support: No
Infill: >=10%
Material: PLA+

04x04 X-Crossing
A cross with the dimensions of 04x04

Resolution: 0.2 mm
Support: No
Infill: >=10%
Material: PLA+

06x04 Curve to left an right
A curve to the left and right with the dimensions of 06x04

Resolution: 0.2 mm
Supports: No
Looping: >=10%
Material: PLA+

06x04 Straight and Curve to left an right
A straight track combined with a curve to the left and right with dimensions of 06x04. So you can make one out of 3 ways

Resolution: 0.2 mm
Supports: No
Infill: >=10%
Material: PLA+

06x06 End middle
Catching tray for the marbles with the opening in the middle and the dimensions of 06x06

Resolution: 0.2 mm
Supports: No
Infill: >=10%
Material: PLA+

06x06 End left
Collecting tray for the marbles with the opening on the left and the dimensions of 06x06

Resolution: 0.2 mm
Supports: No
Infill: >=10%
Material: PLA+

06x06 End right
Collecting tray for the marbles with the opening on the right and the dimensions of 06x06

Resolution: 0.2 mm
Supports: No
Infill: >=10%
Material: PLA+

08x08 Wormhole left
Let the marbles spin in circles until they fall into the hole in the center. The entrance is on the left and the wormhole has the dimensions of 08x08

Resolution: 0.2 mm
Supports: No
Infill: >=10%
Material: PLA+

08x08 Wormhole right
Let the marbles spin in circles until they fall into the hole in the center. The entrance is on the right and the wormhole has the dimensions of 08x08

Resolution: 0.2 mm
Supports: No
Infill: >=10%
Material: PLA+